ALLOY STEEL ASME SA335 GRADE P5

[Fiyat sorunuz]

Description

Steel grade: ASTM A335 P5 Packing: Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested. Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface treatment: Oil-dip, Varnish, Passivation, Packing: Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthily delivery or as requested. Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test. Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting. Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested. ASTM A335 P5 Chemical Compositions(%) Compositions Data UNS Designa-tion K41545 Carbon(max.) 0.15 Manganese 0.30-0.60 Phosphorus(max.) 0.025 Silicon(max.) 0.50 Chromium 4.00-6.00 Molybdenum 0.45-0.65 Other Elements … Mechanical properties for ASTM A335 P5 Properties Data Tensile strength, min, (MPa) 415 Mpa Yield strength, min, (MPa) 205 Mpa Elongation, min, (%), L/T 30/20 Material & Manufacture Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below. Heat Treatment – A / N+T – N+T / Q+T – N+T Mechanical Tests Specified – Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test – For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested. – For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.